3M 7300 High-Productivity Stripping Floor Pads, 19in. Dia, 0.5in. Thick, Black, 175 - 600 RPM
Quickly and thoroughly removes old floor finish, dirt and buildup.
Unique, open web construction allows stripping solution to flow through pad to rinse out dirt and reduce loading for increased pad-to-floor contact and efficient stripping.
This product is a floor maintenance stripping pad made of continuous filament nylon in an open textured non-woven construction.
Abrasive particles are disbursed throughout and bonded to the non-woven construction with a durable adhesive.
The pads are nominally one-half inch thick.
The pad is used with water-based floor finish stripping solutions to remove old soiled floor finishes and sealers.
The product is normally used on low speed rotary floor machines or automatic scrubbers.
Circular discs and other shapes are available in a variety of common sizes.
Directions for Use: Dust mop or sweep floors prior to scrubbing with a water-based floor finish stripping solution and the High Productivity Pad.
Pick up dirty stripping solution with a mop, wet vacuum or automatic scrubber.
Rinse floor and let dry before recoating.
Pad Cleaning: Pads may be hosed out using a pressure spray nozzle to remove soil.
Pads may be soaked in detergent or diluted stripping solution to dissolve caked-on soil or finish prior to cleaning.
Packaging: 5 pads per case
O.D. Dimension: Designated size 0.63in.
Thickness: 0.5 inch nominal
Weight (4 in. x 6 in.): 22 g
Fiber type: Continuous filament nylon
Fiber size: 500 denier
Average tensile strength: 42 lbs./2 in.
Aggressiveness (cut): 3.5 g
Average mineral weight (4 in. x 6 in.): 15 g
Recycle content of packaging: Not less than 35 percent post-consumer recycled material